I ought to be able to assign Laser 1 or Laser 2 to each layer in lightburn, however, when I try to set this up, setting any given layer to a specific laser causes all the other layers to switch to the same layer. I’ve been through a few video tutorials and cannot find the step I am missing. Please help.
Could you please check your Machine Settings to see if Laser2 Enabled is turned on?
After enabling it, please remember to click the Write button at the bottom to save and upload the settings to your machine.
Both lasers are enabled in the machine settings
Please click the link below to submit a support ticket. Our dedicated after-sales team will help you identify the root cause and resolve the issue as quickly as possible: